View MCH3106_604059.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

Ordering number : ENN6861A
MCH3106
PNP Epitaxial Planar Silicon Transistor
MCH3106
DC / DC Converter Applications
Applications
*
Package Dimensions
unit : mm 2194A
[MCH3106]
0.25
Relay drivers, lamp drivers, motor drivers, strobes.
Features
* * * * *
*
Adoption of MBIT processes. Large current capacitance. Low collector-to-emitter saturation voltage. High-speed switching. Ultrasmall package facilicates miniaturization in end products (mounting height : 0.85mm). High allowable power dissipation.
0.3 3
0.15
2.1
1.6
0.25
0.65 2.0
(Bottom view)
0.07
2
1
3
1 : Base 2 : Emitter 3 : Collector
Specifications
Absolute Maximum Ratings at Ta=25C
Parameter Collector-to-Base Voltage Collector-to-Emitter Voltage Emitter-to-Base Voltage Collector Current Collector Current (Pulse) Base Current Collector Dissipation Junction Temperature Storage Temperature Symbol VCBO VCEO VEBO IC ICP IB PC Tj Tstg Mounted on a ceramic board(600mm2!0.8mm) Conditions
0.85
1
2
(Top view)
SANYO : MCPH3
Unit -15 -12 --5 --3 --5 --600 0.9 150 --55 to +150 V V V A A mA W C C
Ratings
Electrical Characteristics at Ta=25C
Parameter Collector Cutoff Current Emitter Cutoff Current DC Current Gain Gain-Bandwidth Product Output Capacitance Collector-to-Emitter Saturation Voltage Base-to-Emitter Saturation Voltage Marking : AF Symbol ICBO IEBO hFE fT Cob VCE(sat) VBE(sat) Conditions VCB=-12V, IE=0 VEB=-4V, IC=0 VCE=-2V, IC=--500mA VCE=-2V, IC=--500mA VCB=-10V, f=1MHz IC=--1.5A, IB=--30mA IC=--1.5A, IB=--30mA Ratings min typ max --0.1 --0.1 200 280 36 --110 ---0.85 --165 --1.2 560 MHz pF mV V Unit A A
Continued on next page.
Any and all SANYO products described or contained herein do not have specifications that can handle applications that require extremely high levels of reliability, such as life-support systems, aircraft's control systems, or other applications whose failure can be reasonably expected to result in serious physical and/or material damage. Consult with your SANYO representative nearest you before using any SANYO products described or contained herein in such applications. SANYO assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all SANYO products described or contained herein.
SANYO Electric Co.,Ltd. Semiconductor Company
TOKYO OFFICE Tokyo Bldg., 1-10, 1 Chome, Ueno, Taito-ku, TOKYO, 110-8534 JAPAN
20502 TS IM / 22201 TS IM TA-3071 No.6861-1/4
MCH3106
Continued from preceding page.
Parameter Collector-to-Base Breakdown Voltage Collector-to-Emitter Breakdown Voltage Emitter-to-Base Breakdown Voltage Turn-ON Time Storage Time Fall Time Symbol V(BR)CBO V(BR)CEO V(BR)EBO ton tstg tf Conditions IC=--10A, IE=0 IC=--1mA, RBE= IE=--10A, IC=0 See specified Test Circuit. See specified Test Circuit. See specified Test Circuit. Ratings min --15 --12 --5 30 90 10 typ max Unit V V V ns ns ns
Switching Time Test Circuit
PW=20s D.C.1% INPUT IB1 OUTPUT IB2 VR 50W + 220F VBE=5V IC=20IB2= --20IB1= --1.5A + 470F VCC= --5V 1k
RL
--2.0
IC -- VCE
mA --1 6
--1.8
4 --1
mA
--200
IC -- VCE
--0.8mA --0.7mA
--0.6mA
--12mA --10mA
--180
Collector Current, IC -- A
Collector Current, IC -- A
--1.6 --1.4 --1.2 --1.0 --0.8 --0.6 --0.4 --0.2 0 0 --0.2 --0.4 --0.6 --0.8
--160 --140 --120 --100 --80 --60 --40
--8mA --6mA --4mA --2mA
--0.5mA
--0.4mA
--0.3mA
--0.2mA
--0.1mA
--20
IB=0
--1.0 IT02777
0
IB=0
0 --1 --2 --3 --4 --5 IT02778
Collector-to-Emitter Voltage, VCE -- V
--3.5
IC -- VBE
VCE= --2V
Collector-to-Emitter Voltage, VCE -- V
1000 7 5 3 2
hFE -- IC
VCE= --2V
--3.0
Collector Current, IC -- A
--2.5
DC Current Gain, hFE
--2.0
100 7 5 3 2 10 7 5 3 2
--1.5
--1.0
--0.5 0 0 --0.2 --0.4 --0.6 --0.8 --1.0 --1.2 IT02779
1.0 --0.01
2
3
5 7 --0.1
2
3
5 7 --1.0
2
3
Base-to-Emitter Voltage, VBE -- V
Collector Current, IC -- A
5 7 --10 IT02780
No.6861-2/4
MCH3106
--1.0 7 5
VCE(sat) -- IC
IC / IB=20 Collector-to-Emitter Saturation Voltage, VCE(sat) -- V
--1.0 7 5 3 2
VCE(sat) -- IC
IC / IB=50
Collector-to-Emitter Saturation Voltage, VCE(sat) -- V
3 2 --0.1 7 5 3 2
--0.1 7 5 3 2
--0.01 7 5 3 2
--0.001 --0.01
2
3
5 7 --0.1
2
3
5 7 --1.0
2
3
Collector Current, IC -- A
--10 7
5 7 --10 IT02781
--0.01 --0.01
2
3
5 7 --0.1
2
3
5 7 --1.0
2
3
Collector Current, IC -- A
1000 7 5
5 7 --10 IT02782
VBE(sat) -- IC
IC / IB=50 Output Capacitance, Cob -- pF
Cob -- VCB
f=1MHz
Base-to-Emitter Saturation Voltage, VBE(sat) -- V
5 3 2
3 2 100 7 5 3 2 10 7 5 3 2
--1.0 7 5 3 2
--0.1 --0.01
2
3
5 7 --0.1
2
3
5 7 --1.0
2
3
Collector Current, IC -- A
1000 7
5 7 --10 IT02783
1.0 --0.1
2
3
5
7 --1.0
2
3
5
7 --10
2
3
5
f T -- IC
VCE= --2V
Collector-to-Base Voltage, VCB -- V
--10 7 5
IT02784
ASO
Gain-Bandwidth Product, f T -- MHz
5
Collector Current, IC -- A
3 2
3 2 --1.0 7 5 3 2 --0.1 7 5 3 2
ICP= --5A IC= --3A
DC
10
10
op era
ms
50
1m
0
0m
s
s
s
tio
n
100 7 5 3 2
10 7--0.01 2 3 5 7 --0.1 2 3 5 7 --1.0 2 3
Collector Current, IC -- A
1.2
5 7 --10 IT02785
--0.01 --0.1
Ta=25C Single pulse Mounted on a ceramic board(600mm2!0.8mm)
2 3 5 7 --1.0 2 3 5
PC -- Ta
Collector-to-Emitter Voltage, VCE -- V
7 --10 2 IT02786
Collector Dissipation, PC -- W
1.0 0.9 0.8
M
ou
nte
do
na
0.6
ce
ram
ic
bo
ard
0.4
(60
0m
m2 !0
0.2
.8m
m)
0 0 20 40 60 80 100 120 140 160
Ambient Temperature, Ta -- C
IT02787
No.6861-3/4
MCH3106
Specifications of any and all SANYO products described or contained herein stipulate the performance, characteristics, and functions of the described products in the independent state, and are not guarantees of the performance, characteristics, and functions of the described products as mounted in the customer's products or equipment. To verify symptoms and states that cannot be evaluated in an independent device, the customer should always evaluate and test devices mounted in the customer's products or equipment. SANYO Electric Co., Ltd. strives to supply high-quality high-reliability products. However, any and all semiconductor products fail with some probability. It is possible that these probabilistic failures could give rise to accidents or events that could endanger human lives, that could give rise to smoke or fire, or that could cause damage to other property. When designing equipment, adopt safety measures so that these kinds of accidents or events cannot occur. Such measures include but are not limited to protective circuits and error prevention circuits for safe design, redundant design, and structural design. In the event that any or all SANYO products(including technical data,services) described or contained herein are controlled under any of applicable local export control laws and regulations, such products must not be expor ted without obtaining the expor t license from the authorities concerned in accordance with the above law. No part of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording, or any information storage or retrieval system, or otherwise, without the prior written permission of SANYO Electric Co., Ltd. Any and all information described or contained herein are subject to change without notice due to product/technology improvement, etc. When designing equipment, refer to the "Delivery Specification" for the SANYO product that you intend to use. Information (including circuit diagrams and circuit parameters) herein is for example only ; it is not guaranteed for volume production. SANYO believes information herein is accurate and reliable, but no guarantees are made or implied regarding its use or any infringements of intellectual property rights or other rights of third parties. This catalog provides information as of February, 2002. Specifications and information herein are subject to change without notice.
PS No.6861-4/4

▲Up To Search▲

Price & Availability of MCH3106

	To Download MCH3106 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .